Skip to content
Merrell, B.; Lightsey, E.G.; “Proposal for a Space Systems Design Lab Multi-Mission Operations Center ,” August 2024.
Lammens, R.; Lightsey, E.G.; “A Progress Report on the Pre-Phase A Design of HyperSat ,” August 2024.
Fenech, M.; Romero-Calvo, Á.; “Preliminary Assessment of a Pendulum Analogy to Model Low-Gravity Liquid Sloshing ,” May 2024.
Sughi, S.; Hirabayashi, M.; “Analysis of asteroid CC21 dynamic for mission Hayabusa2 ,” May 2024
Schlabach, C.; Lightsey, E.G.; “A Comprehensive Method for Designing a Cislunar PNT-C System Through Phased Development ,” May 2024.
Placanica, M.; Lightsey, E.G.; “Development and Fabrication of Aerospace Grade Perovskite Solar Cells for Lunar Use ,” May 2024.
Nagarajan, R.; Lightsey, E.G.; “An Investigation of the Susceptibility and Practical Mitigation of Pitch-Roll Resonance in Fin-Stabilized Liquid Sounding Rockets ,” May 2024.
Baird, S.; Lightsey, E.G.; “Ground-Up Overview of CubeSat Mission Flight Software Design, Implementation, and Testing ,” May 2024.
Jordan, G.; Lightsey, E.G.; “Operational Development of Rotating Propulsive Maneuvers for NASA’s Lunar Flashlight Mission , ” May 2024.
Tong, K.; Lightsey, E.G.; “Spacecraft Systems Engineering and Design of the Green Propulsion Dual Mode Mission ,” December 2023.
Starr, M.; Lightsey, E.G.; “Development of Tactical and Strategic Operations Software for NASA’s Lunar Flashlight Mission ,” December 2023.
Krahn, G.; Lightsey, E.G.; “VISORS Assembly, Integration, and Test Plan ,” December 2023.
Mealey, A.; Gunter, B.C.; “Space Object Tracking from CubeSats utilizing Low-Cost Software Defined Radios , ” December 2023.
Cancio, J.; Lightsey, E.G.; “Angular Momentum Desaturation Solutions for Lunar Flashlight Anomalous Thrust Scenario ,” December 2023.
Bustos, A.; Gunter, B.C.; “Development of an Open Source Data Visualization and Automated Testing Platform for CubeSat Subsystems , ” August 2023.
Kalidindi, L.K.; Gunter, B.C.; “Satellite Orbit Classification through Machine Learning ,” August 2023.
Schweiger, G.A.; Gunter, B.C.; “A Survey and 3LE Generation Model of Megaconstellations in the Future LEO Environment ,” May 2023.
Kapoor, A.; Gunter, B.C.; “Modal Analysis and GEO Simulation of Large Space Structures ,” May 2023.
Lawver, L.; Gunter, B.C.; “Wireless Energy from Beamed Signals – A Case Study in Rapid CubeSat Design ,” May 2023.
Arunkumar, E.; Lightsey, E.G.; “Design of the Hosted Software Application for the VISORS Mission ,” May 2023.
Carter, P.; Lightsey, E.G.; “Deep Space Relay Architecture for Communication and Navigation ,” May 2023.
Glaser, M.; Lightsey, E.G.; “Lessons Learned in University Production of CubeSat Propulsion Systems ,” May 2023.
Hartigan, M.; Lightsey, E.G.; “Simulation and Analysis of Navigation Performance for Cislunar PNT Constellations ,” May 2023.
Hauge, M.; Lightsey, E.G.; “Operations Systems Engineering for the Lunar Flashlight Mission ,” May 2023.
Kimmel, E.; Lightsey, E.G.; “VISORS Mission Orbit & Dynamics Simulation Using a Realtime Dynamics Processor ,” May 2023.
Lawver, L.; Gunter, B.; “Wireless Energy from Beamed Signals: A Case Study in Rapid CubeSat Design ,” May 2023.
Paletta, A.; Lightsey, E.G.; “Development of an Autonomous Distributed Fault Management Architecture for the VISORS Mission ,” May 2023.
Sharma, S.; Lightsey, E.G.; “Nonlinear Model Predictive Controller Implementation on a Microprocessor for 2D Lunar Powered Descent ,” May 2023.
Smith, D.; Lightsey, E.G.; “Modeling, Developing, and Optimizing Minimal Cislunar PNT Constellations ,” May 2023.
Wood, S.; Lightsey, E.G.; “Refill Strategy for Two-Tank Cold Gas Propulsion Systems ,” May 2023.
McDonald, D.; Lightsey, E.G.; “Fault Management in Small Satellites ,” December 2022.
Hart, S.T.; Lightsey, E.G.; “Design of the VISORS and SWARM-EX Propulsion Systems ,” December 2022.
Rawson, W.; Lightsey, E.G.; “Best Practices and Considerations for Planning and Conducting Integration of University CubeSats ,” December 2022.
Sheikh, F.; Ho, K.; “Numerical Optimization of Satellite Avoidance Maneuvers ,” December 2022.
Dupont, A.; Lightsey, E. G.; “Extension of the GMAT Analysis Report to the Formation with Both CubeSats ,” August 2022.
Bouhall, M.M.; Gunter, B.C.; “Line of Sight Observational and Inertial Sensing Requirements for Multi-UAV Tracking subject to GNSS Denial ,” August 2022.
Sakson, D.; Gunter, B.C.; “Impacts of Altitude on Expectation Maximization-based Data Association and Orbit Estimation ,” August 2022
Shirazi, K.; Lightsey, E.G.; “Integration and Testing of a 2U Cold-Gas Propulsion System for the SunRISE Mission ,” August 2022.
DiStasio, L.; Gunter, B.C.; “The Attitude and Determination Control System (ADCS) for the Orbital Calibration 2 Mission (OrCa2) ,” June 2022.
Menon, A.; Gunter, B.C.; “Entry-vehicle conceptual design to enable multiple-payload delivery to Titan ,” May 2022.
Medisetti, J.; Lightsey, E.G.; “Development of a Lunar Mission Operations Center for the NASA JPL Lunar Flashlight Mission ,” May 2022.
Ramanathan, K.; Lightsey, E. G.; “Investigation and Analysis into Establishing a Cislunar PNT System and Performing a Soft Landing on the Lunar Surface ,” May 2022.
Tokarz, A; Gunter, B.C.; “Considering the Effects of Radiation and the Space Environment on Small Satellites ,” May 2022.
Murphy, B.; Gunter, B.C.; “Development of an Optimized Spacecraft Attitude Profile Using Lexicographic Optimization Techniques ,” April 2022.
Colón, B.; Lightsey, E.G.; “Spectre – Design of a Bimodal Propulsion System ,” December 2021.
Manchikanti, K.; Lightsey, E.G.; “Design and Test of an Embedded Systems Controller for a BiModal CubeSat Propulsion System ,” December 2021.
Murphy, C.; Gunter, B.C.; “Inner Solar System Communications Infrastructure Expansion ,” December, 2021.
Nguyen, D.N.: Gunter, B.C.; “Simulating Magnetohydrodynamically- Controlled Aerocapture and Comparing to its Atmospherically Controlled Counterpart ,” December 2021.
Kolhof, M.; Lightsey, E.G.; “Design of a Payload Avionics Interface Board for the VISORS (VIrtual SuperOptics with Reconfigurable Swarms) CubeSat Mission ,” December 2021.
Blair, W.R.; Lightsey, E.G.; “An Orbital Capability Analysis of CubeSats Utilizing a Bimodal Monopropellant Propulsion System ,” August 2021.
Dutta, A.; Lightsey, E.G.; “VISORS Mission Design and Spacecraft Layout ,” August 2021.
Littleton, L.M.; Lightsey, E.G.; “Assembly, Integration, and Testing of a Green Monopropellant Propulsion System for NASA’s Lunar Flashlight Mission ,” August 2021.
Skidmore, L.; Lightsey, E.G.; “Design of a Cold Gas Propulsion System for the SunRISE Mission ,” August 2021.
Davisson, M.; Gunter, B.C.; “On-Orbit Assembly of Interlocking CubeSat Structures Using Free-Flying Rendezvous Techniques ,” August 2021.
Kumar, B.; Gunter, B.C.; “Computation and Analysis of Jupiter-Europa and Jupiter-Ganymede Resonant Orbits in the Planar Concentric Circular Restricted 4-body Problem ,” August 2021.
Rapoport, S.; Lightsey, E.G.; “A Technology Development Plan to Enable a Europa Subsurface Probe Mission Concept Based on the Vertical Entry Robot for Navigating Europa (VERNE) , ” May 2021.
Harathi, A.; Gunter, B.C.; “The Attitude and Determination Control Subsystem (ADCS) for the Tethering and Ranging Mission of the Georgia Institute of Technology (TARGIT) ,” May 2021.
Macke, R.J.; Gunter, B.C.; “Analysis of Potential Collision Maneuver Guidelines for Future Space Traffic Management ,” May 2021.
Gundamraj, A.; Lightsey, E.G.; “Attitude Guidance and Control Law Design for the Science Phases of the SWARM-EX Mission ,” May 2021.
Jagatia, B.; Gunter, B.C.; “Exploratory Study of Interplanetary Trajectories for a Twin-Spacecraft Mission to the Ice Giants ,” May 2021
Saborio Borbon, R. J.; Lightsey, E.G.; “Development of an Open-Source Amateur Radio Transceiver for Small Satellites ,” May 2021.
Lee, K.A.; Gunter, B.C.; “Genetic Algorithm for Space Mission Design ,” May 2021.
McNulty, W.; Gunter, B.C.; “Evaluation of an Inexpensive Alternative to a Lidar- Based Aerial UAV Surveying Platform ,” May 2021.
Harathi, A.; Gunter, B.C.; “The Attitude and Determination Control Subsystem (ADCS) for the Tethering and Ranging Mission of the Georgia Institute of Technology (TARGIT) ,” May 2021.
McNulty, W.; Gunter, B.C.; “Evaluation of an Inexpensive Alternative to a Lidar-Based Aerial UAV Surveying Platform ,” May 2021.
Jagatia, B.; Gunter, B.C.; “Exploratory Study of Interplanetary Trajectories for a Twin-Spacecraft Mission to the Ice Giants ,” May 2021.
Hartwell, K.E.; Lightsey, E.G.; “Design and Creation of a Mission Control Center for Georgia Tech Satellites ,” May 2021.
Nassif, M.; Gunter, B.C.; “Gravity Science Requirements for Future Icy/Ocean Worlds SmallSats Missions ,” December 2020.
Thatavarthi, R.; Lightsey, E.G.; “Payload System Design of a CubeSat Distributed Telescope ,” December 2020.
Daniel, N.; Lightsey, E.G.; “Simulation and Dynamic Modeling of a Thermomechanical Ice Probe ,” December 2020.
Talaksi, A.; Lightsey, E.G.; “Manufacturing, Integration, and Testing of the Green Monopropellant Propulsion System for NASA’s Lunar Flashlight Mission ,” December 2020.
Huggins, G.; Lightsey, E.G.; “Development of a Cubesat-Scale Green Monopropellant Propulsion System for NASA’s Lunar Flashlight Mission ,” August 2020.
Renegar, L.; Gunter, B.C.; “Optical Satellite Orbit Determination from Geographically Dispersed Sensors ,” August 2020.
Hall, S.; Gunter, B.C.; “A Survey of Free Space Optical Communications in Satellites ,” May 2020.
Carter, C.; Lightsey, E.G.; “CubeSat Slosh Dynamics and Its Effect on Precision Attitude Control for the VISORS Distributed Spacecraft Telescope Mission ,” May 2020.
Szot, P.; Lightsey, E.G.; “Vertical Entry Robot for Navigating Europa (VERNE) ,” May 2020.
Wu, D.; Gunter, B.C.; “SDA Visible Range Object Detection Performance Optimization Under Urban Environment ,” May 2020.
Guecha-Ahumada, N.G.; Lightsey, E.G.; “Design of the Attitude Estimation Algorithms for the GT-1 CubeSat ,” May 2020.
Hunter, R.A.J.; “Optimal Phasing and Performance Mapping for Translunar Satellite Missions Across the Earth-Moon Nodal Cycle , ” School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA, 2020.
Núñez Garzón, U.E.; Lightsey, E.G.; “Mahalanobis Shell Sampling (MSS) method for collision probability computation , ” December 2019.
Andrews, D.; Lightsey, E.G.; “Design of a Green Monopropellant Propulsion System for the Lunar Flashlight Mission ,” December 2019.
Ingersoll, J.; Gunter, B.C.; “A Technical Evaluation of Integrating Optical Inter-Satellite Links into Proliferated Polar LEO Constellations ,” December 2019.
Amin, J.; Lightsey, E.G.; “The Design, Assembly, and Testing of Magnetorquers for a 1U CubeSat Mission , ” December 2019.
Bewley, L.E.A.; Gunter, B.C.; “CubeSat Inter-satellite Tracking Using Remote Sensing and Trajectory Estimation , ” December 2019.
Payne, J. H.; Lightsey, E.G.; “X-Ray Pulsar Navigation Instrument Performance and Scale Analysis ,” December 2019.
Subagia, R.; Gunter, B.C.; “Precise Tracking of UAVs using LiDAR and Computer Vision , ” June 2019.
Groesbeck, D.; Gunter, B.C.; “Autonomous Control of Small Satellite Formations using Differential Drag ,” May 2019.
Elarbee, J.H.; Gunter, B.C.; “Processing Strategy for GNSS-based Orbit Determination of Small Satellites , ” May 2019.
Wilk, M.; Lightsey, E.G.; “Development of Maneuverable Deep Space Small Satellites ,” May 2019.
Tadanki, A.; Lightsey, E.G.; “Closing the Power Budget Architecture for a 1U CubeSat Framework ,” May 2019.
Henley, B.; Gunter, B.C.; “Lunar Laser Ranging from Low Earth Orbit ,” May 2019.
Simmons, E.E.; Gunter, B.C.; “Application of Self-Healing Materials to Leak Repair in Inflatable Structures ,” May 2019.
Guo, Y.; Gunter, B.C.; “Relative Positioning and Tracking of Tethered Small Spacecraft Using Optical Sensors , ” December 2018.
Claybrook, A.W.; Gunter, B.C.; “A Preliminary Assessment of the RANGE Mission’s Orbit Determination Capabilities ,” August 2018.
Swenson, J.C.; Lightsey, E.G.; “Coulomb-Force Based Control Methods for an n-Spacecraft Reconfiguration Maneuver ,” May 2018.
DeGraw, C.F.; Holzinger, M.J.; “A Scalable Hardware-in-the-Loop Simulation for Satellite Constellations and Other Multi-Agent Networks ,” May 2018.
Yuricich, J.; Holzinger, M.J.; “Strategic Planning of Abort Trajectories for Manned Lunar Missions ,” May 2018.
Heron, M.R.; Lightsey, E.G.; “Analysis of an Aerotorquer for the Control of CubeSats with Large Torque Requirements ,” May 2018.
Himani, T.; Lightsey, E.G.; “MicroNimbus: A CubeSat Mission for Millimeter-Wave Atmospheric Temperature Profiling ,” May 2018.
Axon, L.E.; Holzinger, M.J.; “Early Collision and Fragmentation Detection of Space Objects without Orbit Determination ,” May 2018.
Li, J.H.; Lightsey, E.G.; “Design, Analysis, and Simulation of Attitude Controllers for the MicroNimbus Mission ,” May 2018.
Boisvert, A.J.; Gunter, B.C.; “Attitude Dynamics of a Tethered CubeSat-Inflatable System in Low Earth Orbit ,” May 2018.
Pujari, S.R.; Lightsey, E.G.; “A Statistical Analysis and Predictive Modeling of Safing Events for Interplanetary Spacecraft ,” May 2018.
Carnes, J.T.; Lightsey, E.G.; “Algorithmic Insufficiency of RSSI Based UKF for RFID Localization Deployment On-Board the ISS ,” May 2018.
Li, J.; Lightsey, E.G.; “Design, Analysis, and Simulation of Attitude Controllers for the MicroNimbus Mission ,” May 2018.
Brew, J.; Holzinger, M.J.; “Probabilistic Resident Space Object Detection Using Archival THEMIS Fluxgate Magnetometer Data ,” December 2017.
Selvaratnam, R.; Lightsey, E.G.; “Flyby Trajectory Analysis and Thermal Simulation of a Venus Atmospheric Probe ,” December 2017.
Dahl, T.A.; Gunter, B.C.; “An Evaluation of Spacecraft Pointing Requirements for Optically Linked Satellite Systems ,” August 2017.
Roelke, E.; Braun, R.D.; “Trajectory Trade-space Design for Robotic Entry at Titan ,” May 2017.
Werner, M.S.; Braun, R.D.; “Development of an Earth SmallSat Flight Test to Demonstrate Viability of Mars Aerocapture ,” May 2017.
Choi, T.; Lightsey, E.G.; “User Guide and Status Update for Small Satellite Communication System at Georgia Tech ,” May 2017.
Levine, Z.A.; Gunter, B.C.; “The Development and Characterization of the Laser Ranging System on the RANGE CubeSat Mission ,” December 2016.
Herman, M.; Gunter, B.C.; “Design and Application of a Circular Aperture Sun Sensor , ” December 2016.
Lacerda, M. A.; Gunter, B.C.; “Initial Characterization for LIDAR Remote Sensing from an UAV Platform , ” December 2016.
Woollard, B.A.; Braun, R.D.; “Mechanical Design of a Cubesat Aeroshell for an Earth Demonstration of Single-Stage Drag Modulated Aerocapture ,” August 2016.
Francis, P.; Lightsey, E.G.; “Development of The Evolved Common Hardware Bus (TECHBus) ,” August 2016.
Seywald, K.; Gunter, B.C.; “Refinements to the General Methodology Behind Strapdown Airborne Gravimetry ,” August 2016.
Booher, R.M.; Braun, R.D.; “Entry Characteristics of a Half-Ogive Aeroshell at Earth ,” May 2016.
Blette, D.J.; Braun, R.D.; “Supersonic Vehicle Configuration Transitions to Enable Supersonic Retropropulsion during Mars Entry, Descent, and Landing ,” May 2016.
Sabitbek, B.; Gunter, B.C.; “Orbit Design For A Phobos-Deimos Cycler Mission ,” May 2016.
Worthy III, J.L.; Holzinger, M.J.; “Use of Uninformative Priors to Initialize State Estimation for Dynamical Systems ,” December 2015.
Murphy, T.S.; Holzinger, M.J.; “Space Object Detection in Images Using Matched Filter Bank and Bayesian Update ,” December 2015.
Jaunzemis, A.D.; Holzinger, M.J.; “Control Cost and Mahalanobis Distance Binary Hypothesis Testing for Spacecraft Maneuver Detection ,” December 2015.
Snow, A.C.; Holzinger, M.J.; “Multi-Objective CubeSat Constellation Optimization for Space Situational Awareness ,” December 2015.
Chait, S.B.; Spencer, D.A.; “Georgia Tech Small Satellite Real-Time Hardware-in-the-Loop Simulation Environment: SoftSim6D ,” December 2015.
Grøtte, M.E.; Holzinger, M.J.; “Solar Sail Equilibria with Albedo Radiation Pressure in the Circular Restricted Three Body Problem ,” May 2015.
Ali, H.K.; Braun, R.D.; “In Situ Magnetohydrodynamic Energy Generation for Planetary Entry Systems ,” May 2015.
Hart, K.A.; Braun, R.D.; “Analytic Aerodynamic and Solar Radiation Pressure Modeling of Resident Space Objects ,” May 2015.
Tyman, N.M.; Holzinger, M.J.; “Coding Framework and Implementation for Resident Space Object Observation ,” May 2015.
Long, A.C.; Spencer, D.A.; “Trade Study and Analysis for a Deployable Drag Device for Launch Vehicle Upper Stage Deorbit ,” May 2015.
Ginn, J.M.; Clark, I.G.; Braun, R.D.; “Parachute Dynamic Stability and the Effects of Apparent Inertia ,” December 2014.
Schulte, P.Z.; Spencer, D.A.; “Prox-1 Guidance, Navigation, & Control Overview: Development, Algorithms, and Integrated Simulation , ” December 2014.
Sidor, A.T.; Braun, R.D.; “Design and Development of RED-Data2: A Data Recording Reentry Vehicle ,” August 2014.
Harper, B.P.; Braun, R.D.; “Preliminary Design Study of Asymmetric Hypersonic Inflatable Aerodynamic Decelerators for Mars Entry ,” May 2014.
Matz, D.A.; Braun, R.D.; “A Comparison of Three Algorithms for Orion Drogue Parachute Release ,” May 2014.
Mandalia, A.B.; Braun, R.D.; “Supersonic Propulsive Divert Maneuvers for Future Robotic and Human Mars Missions ,” December 2013.
Miller, M.J.; Steinfeldt, B.A..; Braun, R.D.; “Investigation of Drag Modulated Supersonic Inflatable Aerodynamic Decelerators for Use on Sounding Rocket Payloads ,” December 2013.
Rossman, G.A.; Braun, R.D.; “Flexible Thermal Protection System Physics-Based Modeling for Temperature Profile Predictions ,” December 2013.
Gonyea, K.; Braun, R.D.; “Aerodynamic Stability and Performance of Next-Generation Parachutes for Mars Descent ,” July 2013.
Li, L.; Braun, R.D.; “Photogrammetry Analysis of a Hypersonic Inflatable Aerodynamic Decelerator Structural Test Article ,” July 2013.
Bernatovich, M.; Clark, I.G.; “A Method to Characterize Parachute System Instability Modes ,” May 2013.
Zappulla II, R.; Spencer, D.A.; “Prox-1 Guidance, Navigation & Control Formulation and Algorithms ,” May 2013.
Cruz-Ayoroa, J.G.; Braun, R.D.; Garcia, J.A.; Melton, J.D.; Gnoffo, P.A.; “Evaluation of Deployable Aerosurface Systems for Mars Entry ,” December 2012.
Hill, J.; Braun, R.D.; “Implementation of a Mesomechanical Material Model for IAD Fabrics within LS-DYNA ,” December 2012.
Stout, S.E.; Spencer, D.A.; “SPORE Parachute Design and Selection ,” December 2012.
Willingham, A.L.; Spencer, D.A.; “Structural Design, Analysis, and Test of the Prox-1 Spacecraft ,” December 2012.
Bauer, N.C.; Spencer, D.A.; “SPORE Mission Design , ” August 2012.
Juneau Clark, J.; Spencer, D.A.; “Design of a High Altitude Balloon Drop Test for SPORE (Small Probes for Orbital Return of Experiments) ,” May 2012.
Kazemba, C.D.; Braun, R.D.; “Dynamic Stability Analysis of Blunt Body Entry Vehicles Through the Use of a Time-Lagged Aftbody Pitching Moment ,” May 2012.
Meginnis, I.M.; Braun, R.D.; “Guided Entry Performance of Low Ballistic Coefficient Vehicles at Mars ,” May 2012.
Nehrenz, M.T.; Spencer, D.A.; “Design and Analysis of the Deorbit and Earth Entry Trajectories for SPORE ,” May 2012.
Walker, L.A.; Spencer, D.A.; “Automated Proximity Operations Using Image-Based Relative Navigation ,” May 2012.
Gast, M.A.; Spencer, D.A.; “Near-Earth Object Extravehicular Activities: Using Apollo and ISS Operations to Map Low-Gravity Terrestrial Spacewalk Objectives and Challenges ,” December 2011.
Pappas, T.D.; Spencer, D.A.; “Design, Analysis, and Testing of the Prox-1 Satellite Structure ,” December 2011.
Patel, H.; Lovell, T.A.; Russell, R.; Sinclair, A.; “Relative Navigation for Satellites in Close Proximity Using Angles-Only Observations ,” December 2011.
Pietruszewski, A.N.; Spencer, D.A.; “Prox-1 Attitude Determination and Control ,” December 2011.
Ross, J.; Russell, R.P.; “Efficient Mission Design via EXPLORE: Employing EXPLORE for Rapid Trajectory Design and Analysis ,” December 2011.
McNeese, S.E.; Spencer, D.A.; “Center For Space Systems Mission Success Assurance: Requirement Verification and Spacecraft Integration and Test Program ,” May 2011.
Smith, B.P.; Braun, R.D.; Clark, I.G.; “Oscillation of Supersonic Inflatable Aerodynamic Decelerators at Mars ,” December 2010.
Mahzari, M.; Braun, R.D.; Clark, I.G.; “An Inverse Parameter Estimation Methodology for the Analysis of Aeroheating and Thermal Protection System Experimental Data ,” September 2010.
Martinelli, S.; Braun, R.D.; “Centerline Heating Methodology for use in Preliminary Design Studies ,” June 2010.
Birdwell, W.C.; Spencer, D.A.; “Rapid Reconnaissance and Response (R3) Tracking Station System ,” May 2010.
Dutta, S.; Braun, R.D.; “Mars Entry, Descent, and Landing Trajectory and Atmosphere Reconstruction ,” May 2010.
Kelly, J.R.; Spencer, D.A.; “Rapid Reconnaissance and Response (R3) Mission Plan ,” May 2010.
Vedie, N.; Spencer, D.A.; “Rapid Reconnaissance and Response (R3) Thermal Algorithms ,” May 2010.
Lafleur, J.M.; Saleh, J.H.; “Exploring the F6 Fractionated Spacecraft Trade Space with GT-FAST ,” December 2009.
Chua, Z.; Braun, R.D.; Feigh, K.M.; “Analysis of Human-System Interaction for Landing Point Redesignation ,” May 2009.
Cordell, C.; Braun, R.D.; “Computational Fluid Dynamics Validation of a Single Central Nozzle Supersonic Retropropulsion Configuration ,” May 2009.
Hutchings, A.; Braun, R.D.; “Experimental Determination of Material Properties for Inflatable Aeroshell Structures ,” May 2009.
Brinckerhoff, A.T.; Russell, R.P.; “Resonance Hopping Transfers Between Moon Science Orbits ,” April 2009.
Marsh, C.; Braun, R.D.; “Fully-Propulsive Mars Atmospheric Transit Strategies for High-Mass Missions ,” April 2009.
Smith, P.J.; Braun, R.D.; “Parametric Analysis and Targeting Capabilities for the Planetary Entry Systems Synthesis Tool ,” December 2008.
Flaherty, K.; Braun, R.D.; “Initial Implementation of a Adjoint CFD Code for Aeroshell Shape Optimization ,” May 2008.
Grant, M.; Braun, R.D.; “Smart Divert: A New Entry, Descent, and Landing Architecture ,” May 2008.
Korzun, A.; Braun, R.D.; “Supersonic Retropropulsion Technology for Application to High Mass Mars Entry, Descent, and Landing ,” May 2008.
Steinfeldt, B.; Braun, R.D.; “Guidance, Navigation, and Control Technology System Trades for Mars Pinpoint Landing ,” May 2008.
Stahl, B.A.; Braun, R.D.; “Low-Thrust Trajectory Optimization Tool to Assess Options for Near-Earth Asteroid Deflection , ” December 2007.
Theisinger, J.; Braun, R.D.; “Hypersonic Entry Aeroshell Shape Optimization ,” December 2007.
Kranzusch, K.M.; Braun, R.D.; “Space Shuttle Solid Rocket Booster Control Limitations Due to Failure of an Hydraulic Power Unit ,” November 2007.
Christian, J.; Braun, R.D.; “Statistical Reconstruction of Mars Entry, Descent, and Landing Trajectories and Atmospheric Profiles ,” May 2007.
Lantoine, G.; Braun, R.D.; “Optimal Trajectories for Soft Landing on Asteroids , ” December 2006.
Clark, I.; Braun, R.D.; “An Evaluation of Ballute Entry Systems for Lunar Return Missions ,” May 2006.
Francis, S.; Braun, R.D.; “Entry Systems Design of the Mars Gravity Biosatellite ,” May 2006.
Street, D.; Wilhite, A.; “A Scalable Orbital Propellant Depot Design ,” May 2006.
Thompson, R.; Wilhite, A.; “Performance Evaluation of a Side Mounted Shuttle Derived Heavy Lift Launch Vehicle for Lunar Exploration ,” May 2006.
Wells, G.; Braun, R.D.; “Mars Entry, Descent and Landing Parametric Trades ,” May 2006.
Hellman, B.; Olds, J.; “Comparison of Return to Launch Site Options for a Reusable Booster Stage , ” August 2005.
Alemany, K.; Olds, J.; “Comparison of An Expendable and Reusable Lunar Exploration Architecture Using Lunar Architecture Stochastic Simulator and Optimizer ,” May 2005.
Kipp, D.; Braun, R.D.; “Development of Trajectory Simulation Capabilities for the Planetary Entry Systems Synthesis Tool , ” May 2005.
Prakash, R.; Braun, R.D.; “Comparison of Transition to Flight Methods for a Titan Helicopter , ” May 2005.
Taya, K.; Olds, J.; “Conceptual Design and Analysis of a Small and Low-Cost Launch Vehicle (Microcosm Sprite Test Model) ,” May 2005.
Young, J.; Olds, J.; “Probabilistic Assessment of the Space Tourism Industry: What Will it Take to Make it Profitable? ,” May 2005.
Reeves, J.; Olds, J.; “Discrete Event Simulation of Reusable Launch Vehicle Ground Operations ,” July 2004.
Brown, N.; Olds, J.; “Evaluation of Multidisciplinary Optimization Techniques Applied to a Reusable Launch Vehicle ,” May 2004.
Crowley, J.; Olds, J.; “Design, Modeling, and Simulation of a Hydrogen-Induced Air Liquefaction System Applicable to Space Access Vehicles ,” May 2004.
Hutchinson, V.; Olds, J.; “Analytical Structural Weight of Conceptual Launch Vehicle Fuselage Components with the Georgia Tech Structural Tool for Rapid Estimation of Shell Sizes (GT-STRESS) ,” May 2004.
Krevor, Z.; Olds, J.; “A Case Study of the STS Indirect and Support Costs ,” May 2004.
Pimentel, J.; Olds, J.; “Development of An Online Database Tool for Quick Access to Mass Estimating Relationships ,” May 2004.
Young, D.; Olds, J.; “Responsive Access Small Cargo Affordable Launch (RASCAL) Independent Performance Evaluation , ” May 2004.
Keisner, A.; Olds, J.; “Reliability Analysis Technique Comparison, as Applied to the Space Shuttle ,” December 2003.
Steffes, S.; Olds, J.; “Magel: An Advanced Partially Reusable launch Architecture Concept ,” December 2003.
Grillmayer, G.; Olds, J.; “Space Launch Vehicle Trajectory Optimization using the Weak Hamiltonian Finite Element Method for Optimal Control,” Fall 2002.
Miller, J.; Olds, J.; “Investigation of Transonic Drag Computations in Aerodynamic Preliminary Analysis Systems (APAS) ,” April 2002.
Rohrschneider, R.; Olds, J.; “Development of a Mass Estimating Relationship Database for Launch Vehicle Conceptual Design , ” April 2002.
Staton, E.; Olds, J.; “Developing the Operational Requirements for the Next Generation Launch Vehicle Spaceport , ” April 2002.
Izon, S.; Olds, J.; “Improvements in Thermal Protection System Sizing Capabilities for TCAT ,” December 2001.
Marcus, L.; Olds, J.; “Generating Physics-based Mass Estimating Relationship: A Test Case Using-LOX-Tank Bending Loads Applied to the Forward Lh4 Tank of the Georgia Tech Air Breathing Launch Vehicle , ” December 2001.
Cormier, T.; Olds, J.; “PHATCAT: Power-Head and Thrust Chamber Analysis Tool ,” Fall 2001.
Weglian, J.; Olds, J.; “Trajectory Animator JAVA Applet ,” Fall 2001.
Lee, S.; Olds, J.; “Reliability Drivers for Advanced Space Vehicles , ” July 2001.
Bechtel, R.; Olds, J.; “T-BEAT: Turbine-Based Engine Analysis Tool ,” Summer 2001.
Nelson, D.; Olds, J.; “Qualitative and Quantitative Assessment of Optimal Trajectories by Implicit Simulations (OTIS) and Program to Optimize Simulated Trajectories (POST) , ” April 2001.
Scott, A.; Olds, J.; “An Evaluation of Three Commercially Available Integrated Design Frameworks Packages for use in the Space Systems Design Lab ,” April 2001.
Charania, A.; Olds. J.; “Prioritization of Advanced Space Transportation Technologies Utilizing the Abbreviated Technology, Identification, Evaluation, and Selection (ATIES) Methodology for a Reusable Launch Vehicle (RLV) , ” July 2000.
Sorensen, K.; Olds, J.; “Comparison of CFD with APAS Aerodynamic Results for Stargazer, a Bantam-class RLV ,” Fall 1999.
Tooley, J.; Olds, J.; “Performance Evaluation of Bimese RLV for Commercial Payload Missions ,” Fall 1999.
Scott, J.; Olds, J.; “Modeling Large Aerodynamic Datasets with Response Surfaces ,” Fall 1998.
Acton, D.; Olds, J.; “Computational Frameworks for Launch Vehicle Design ,” Spring 1998.
Steadman, K.; Olds, J.; “Cross-Platform Techniques for Code Integration and Optimization ,” Spring 1998.
Bellini, P.; Olds, J.; “I-DEAS to APAS Geometry File Translation ,” Fall 1997.
Lee, H.; Olds, J.; “A Computational Tool for Cost Modeling and Business Simulation in Launch Vehicle Design ,” Summer 1997.
McGinnis, P.; Olds, J.; “Development and Derivation of Equations for Scramjet Engine Modeling ,” Spring 1997.
Saks, G.; Olds, J.; “A Computational Tool for RBCC EnginBC ,” Spring 1997.